Airfree T800 User Manual

PO Box 16460, Portland, OR 97292-0460 z 503-254-6600 z Fax 503-255-2615 UX-T, UXR-T and ALPHA-T Series Pulse Unit Repair Manual

October 2006 - 7 - Disassembly and Reassembly of the Pulse Unit (cont.) 6. Torque Adjuster/Relief Valve a) Check the adjuster for straightne

October 2006 - 8 - Disassembly and Reassembly of the Pulse Unit (cont.) 4. Install the Locator Pins into the Liner and install the Torque Adj

October 2006 - 9 - Disassembly and Reassembly of the Pulse Unit (cont.) 4. The Pulse Unit is now set for maximum fill. Any measurable change

October 2006 - 10 - UX-T, UXR-T and ALPHA-T Series Fill & Draw Sheet Fill & Draw Sheet Key Model of this Tool Group Full Volume of L

October 2006 - 11 - UX-T, UXR-T and ALPHA-T Series Fill & Draw Sheet (cont.) Fill & Draw Sheet Key Model of this Tool Group Full Vol

October 2006 - 12 - UX-T, UXR-T and ALPHA-T Series Fill & Draw Sheet (cont.) Fill & Draw Sheet Key Model of this Tool Group Full Volu

Exploded View of the Pulse Unit UX-T & Alpha-T Pulse Unit Part Number Description Part Number Description 1 2 3 4 5 6 7 8 9 10 11 1

October 2006 - 14 - Recommended Maintenance Pulse Unit The Pulse Unit Oil should be changed every 150,000 cycles or 180 days, whichever comes

October 2006 - 15 - Notes

October 2006 - 16 - Notes

Corporate Headquarters 1204 E Maple Road 10000 SE Pine Street Ave. Morones Prieto 2110 Pte. Troy, MI 48083 Portland, OR 97216 Col. Lo

Contents Page Number 1. Recommended Tools 1 2. Pulse Unit Repair Jigs 2-4 3. Disassembly and Reassembly of the Pulse Unit 5-9 4. F

October 2006 - 1 - Recommend Tools 1. One Set T-handle Metric Allen Wrenches 2. Flat-Bladed Screwdrivers 3. 10 oz. Ball Peen Hammer 4.

October 2006 - 2 - Pulse Unit Repair Jigs Jig for Setting Teflon Seal Part Number Tools Jig is Used With 178-319-8-1 995-512-0-1 UX-450 U

October 2006 - 3 - Pulse Unit Repair Jigs (cont.) Glass Syringe Part Number Tools Jig is Used With 188-902-0-2 (1cc) All Models 915-176-

October 2006 - 4 - Pulse Unit Repair Jigs (cont.) Jig For Placing Anvil C/W Driving Blades Into Liner Part Number Tools Used With 190-440-

October 2006 - 5 - Disassembly and Reassembly of the Pulse Unit UX-T, UXR-T & Alpha-T Series A. Disassembly/Reassembly of Pulse Unit 1.

October 2006 - 6 - Disassembly and Reassembly of the Pulse Unit (cont.) B. Inspection 1. Front Liner Plate a) If light scarring on plate su